Mobile locksmith service
Bowen Hills
In a unit or a commercial premises, the address can have several doors that behave quite differently. One belongs to you, another belongs to the building, and the work, the approval and the hardware all change depending on which side of that line a door sits.
Monday–Friday, 7am–4pm · Mobile service
Start with what changed
Which doors are actually yours to change?
The hardest part of access work in a mixed building is not the lock, it is the ownership. Sorting the doors into yours and the building's decides who approves the work and how far the change reaches.
What should I tell the locksmith?
Describe the property, the doors involved, what the key or lock is doing and who needs access. You do not need to identify the lock type yourself.
Repair, rekey or replace?
The right path depends on whether the hardware is still serviceable, whether old keys must stop working and whether the current lock still suits the door.
A clearer decision
Which doors are actually yours to change?
The hardest part of access work in a mixed building is not the lock, it is the ownership. Sorting the doors into yours and the building's decides who approves the work and how far the change reaches.
The door of the unit
Your own entry is yours to organise
The entry door of a unit or tenancy is the door the occupant controls, so a rekeyed cylinder or a repaired latch is arranged much like a house. Keys held by past occupants, a tradesperson or an agent are the usual reason to act.
The practical next stepControl of the door you actually use.
Shared and common property
The lobby, gates and garage are managed elsewhere
Lobby doors, garage entries, gates and shared corridors are common property, looked after through the body corporate or building management. They are not changed on a single occupant's instruction, and they usually work on a different system altogether.
The practical next stepWork kept on the right side of the line.
Commercial premises
Different staff need different doors
On a commercial premises, not everyone needs the same reach. Front-of-house staff, the office and the store room can each be given their own level, so a key opens the doors that role requires and no more. That is set up when the locks are planned, not added later.
The practical next stepAccess matched to the role rather than the building.
Local service planning
Bowen Hills units and mixed-use premises
Bowen Hills is postcode 4006 and sits inside the area covered by the mobile service from Chermside West. At a unit or commercial address, the first step is to separate the doors you control from the doors the building manages.
Start by listing the doors
Note the entry, any second door, the garage or parking access and the shared entries. Marking which of those are common property saves a wasted visit and clears up who should be asked to approve the work.
Ask before changing shared hardware
Where a door is common property, the approval route runs through the body corporate or building management. In most cases the occupant's own entry can be dealt with on its own, without touching anything the building controls.
Plan access for the people using the space
A premises with staff, contractors or a shared office works better when the doors are grouped by who needs them. Working that out first means the keying is only done once.
Common locksmith work
Access work for units and premises
Choose the page that best matches the outcome you need, or describe the problem in the enquiry form.
Service option
Body Corporate Services
Lock and key work around common property, coordinated with the body corporate or building management that approves changes to shared doors.
Read about Body Corporate Services →Service option
Commercial Locksmith Solutions
Locking hardware and access arrangements for business premises, planned around how the building is used through the working day.
Read about Commercial Locksmith Solutions →Service option
Master Keying
Setting keys at different levels so one key opens more doors than another, which is how staff, managers and contractors are kept apart.
Read about Master Keying →Service option
Lock Installation
Fitting locks to the doors you control, including a second locking point on an entry that currently relies on a single latch.
Read about Lock Installation →
Locksmith Services North Brisbane
A local person to talk to
Explain the access problem in plain language.
Locksmith Services North Brisbane is a mobile business run by Stephen Johnston from Chermside West QLD 4032, covering Bowen Hills. Appointments are booked Monday to Friday, 7am to 4pm. Use the phone number or enquiry form on this page with the doors and the building.
See over 100 five-star Google reviews →
What happens next
Sorting out a unit or premises entry
- 01 / Step
Work out which door each key belongs to
Say whether the address is a unit, a tenancy or a business premises, and list each door the keys operate. That immediately shows which doors are the occupant's and which belong to the building.
- 02 / Step
Confirm who approves the work
For the occupant's own entry, that is usually the occupant or the owner. For anything shared, the body corporate or building management is the approving party, and their scope is confirmed before a time is set.
- 03 / Step
Change the keying or fit the hardware
The locks within scope are rekeyed or replaced, access levels are set where a premises needs them, and every door is tested open and shut. Keys are then counted out and recorded.
Useful guidance
Where the line sits in a shared building
Private tenancy against common property
A practical rule is to ask who maintains the door. The entry to a unit is generally the occupant's or owner's to organise, while a lobby, a garage entry or a gated corridor is maintained for everyone and sits with the body corporate. Work that crosses that line needs the building's agreement.
Access levels on a premises
Not every lock needs to be the same. A store room, an office and a front counter can each sit at their own level, so a person is given the reach their role needs. Setting that out at the start is far easier than revisiting it whenever someone joins or leaves.
Doors that form part of a building's exits
Some doors in a commercial or shared building form part of an exit route and are not handled the same way as an ordinary door. Where that applies, the building's requirements decide what can be fitted, which is another reason to confirm the scope before ordering anything.
Useful answers
Bowen Hills locksmith questions.
If your situation is different, tell us what changed and what you need the doors or keys to do.
Can I change the entry door of my unit?
The entry door of a unit or tenancy is the one the occupant normally arranges, and a rekey there does not involve anything else. Doors shared with the rest of the building, such as a lobby or garage entry, are managed by the body corporate.
Who approves lock work on a shared door?
Common property is looked after for everyone, so the approval comes through the body corporate or building management rather than an individual occupant. Confirming that scope first keeps the work to the doors that are actually in a position to be changed.
Can staff be restricted to certain doors?
Yes. Keys can be set at different levels, so one opens the store room and the office while another opens only the front door. That is worked out when the locks are planned, which is why it helps to describe the roles before the visit.
What is different about a commercial entry?
A premises usually has more doors in play and more people needing access, so the planning matters more than the hardware. Doors that form part of an exit route have their own requirements, and those are confirmed with the building before anything is fitted.
What hours are Bowen Hills appointments available?
Locksmith appointments are booked Monday to Friday, 7am to 4pm. Have the doors listed and the approver identified before getting in touch, and the scope can usually be settled in one conversation.
More coverage
Other North Brisbane areas.
Need help at another property? Contact us with the address and the access problem.
Contact Locksmith Services North Brisbane →Your next step
Tell us about
your doors.
Include your Bowen Hills address, the doors or access points involved, what has changed and the result you need.
(07) 3469 5101 ↗Call Monday–Friday, 7am–4pm
Please leave out access codes, alarm details and photographs of key cuts. Confirm who can authorise the work.
Other contact details →Fields marked * are required. Street address is optional.